Crossfire Dual Tire Pressure Equalization System, 95 PSI, one per pkg. (CF95STABT)

You looking to find the "Crossfire Dual Tire Pressure Equalization System, 95 PSI, one per pkg. (CF95STABT)" Good news! You can purchase Crossfire Dual Tire Pressure Equalization System, 95 PSI, one per pkg. (CF95STABT) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $60.00    

Product Description

America's Leading Dual Tire Pressure Equalization System Saves You Time and Money.

Dual tires have a set of problems all their own. In motion, the inner tire's temperature increases due to in-board brakes and poor air circulation. This causes increased air pressure, which expands the inner tire's diameter. As a result, the dual tire configuration is now distorted- the diameters are unequal. Crossfire is a pressure equalizing and monitoring valve that is mounted between dual tires. It bolts easily to the lug, hub cap, or drive axle end. Properly mounted, air freely flows from one tire to the other, maintaining equal tire pressure and load distribution.

The Crossfire Dual Tire Pressure Equalization system:

Maximizes tire life

Decreases rolling resistance for increased fuel mileage

Cuts maintenance time due to single-point inflation and the visual pressure gauge

Improves stability, braking and overall safety

Installs in minutes and requires little maintenance

Pays for itself in less than a year

American-made and guaranteed for two years

This Crossfire System is for ONE dual tire set and comes with:

2 Stainless Steel Hoses, one with straight fitting and one with 180 fitting

3 mounting bracket types:

Bracket A: installed on the 5/8"" or 3/4"" drive axle bolts of both disc and spoke wheels. If the wheel has a hubcap, it can be snapped on over the bracket.
Bracket B: mounts directly on the 1-1/4"" lug bolt.
Bracket T: mounts on the 1/4"" bolt that secures the hub cap to either a disc or spoke wheel.

Click here for more details on how this product works.

Crossfire Dual Tire Pressure Equalization System, 95 PSI, one per pkg. (CF95STABT) Review

This product lets me know at a glance that my rear dual tires are at proper inflation. Adjusting pressure is very easy with the common fill valve. My installation required me to remove my wheelcovers, remove one lug nut to mount the common valve support, and attach the hoses to the existing valve stems. Sounded easy. I luckily have a 450 ft lb impact wrench to get the lug nut off. I also had to cut a slot in my wheelcover for the support bracket to stick through. Lastly find someone wih small hands to reach between the duals to attach the inner hoses. The installation was more work then I thought it was going to be but it was absolutly worth it. The crossfire support people were very helpfull during my installation. the crossfires came with many mounting adapters and is a very well built product in my opinion.

Most of the consumer Reviews tell that the "Crossfire Dual Tire Pressure Equalization System, 95 PSI, one per pkg. (CF95STABT)" are high quality item. You can read each testimony from consumers to find out cons and pros from Crossfire Dual Tire Pressure Equalization System, 95 PSI, one per pkg. (CF95STABT) ...

Genuine Hyundai Accessories U8130-3M101 Black All Weather Floor Mat for Hyundai Genesis

You looking to find the "Genuine Hyundai Accessories U8130-3M101 Black All Weather Floor Mat for Hyundai Genesis" Good news! You can purchase Genuine Hyundai Accessories U8130-3M101 Black All Weather Floor Mat for Hyundai Genesis with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $66.85 $59.95   

Product Feature

• All weather floor mats
• Heavy duty material
• Anti-skid ridges
• Genuine OEM parts
• Molded for a exact fit

Product Description

The premium all weather mats are made out of heavy duty material with deeply sculpted channels designed to trap water, road salt, mud and sand. The mats also have anti-skid ridges to prevent shifting in your vehicle. Flexible rubber material won't curl, crack or harden in sub-zero weather. Protective, non-stick finish makes cleanup quick and easy.

Genuine Hyundai Accessories U8130-3M101 Black All Weather Floor Mat for Hyundai Genesis Review

These Mats are a perfect fit for my Hyundai Genesis. It is as if I had them custom made. They are durable, non-slip and fit perfect.

Most of the consumer Reviews tell that the "Genuine Hyundai Accessories U8130-3M101 Black All Weather Floor Mat for Hyundai Genesis" are high quality item. You can read each testimony from consumers to find out cons and pros from Genuine Hyundai Accessories U8130-3M101 Black All Weather Floor Mat for Hyundai Genesis ...

Rancho RS6206B Rear Door Vent Cover Plate

You looking to find the "Rancho RS6206B Rear Door Vent Cover Plate" Good news! You can purchase Rancho RS6206B Rear Door Vent Cover Plate with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $56.83    

Product Feature

• Door Cover Plate
• For Rear Door
• Black

Product Description

Door Cover Plate; Black; Rear;

Rancho RS6206B Rear Door Vent Cover Plate Review

It fits great. Great quality. It bolts right up. Use the factory bolts from ild tire carrier. I waited a while for a tramp stamp like this for my jeep.

Most of the consumer Reviews tell that the "Rancho RS6206B Rear Door Vent Cover Plate" are high quality item. You can read each testimony from consumers to find out cons and pros from Rancho RS6206B Rear Door Vent Cover Plate ...

Kenwood Kfc-C1739Ie 7-Inch 3-Way Custom Fit Speaker System

You looking to find the "Kenwood Kfc-C1739Ie 7-Inch 3-Way Custom Fit Speaker System" Good news! You can purchase Kenwood Kfc-C1739Ie 7-Inch 3-Way Custom Fit Speaker System with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

   

Product Feature

• 7"
• 170W
• 3-Way Custom Fit Car Stereo Speaker System
• Pearl Mica Polypropylene Cone Woofer
• .38" P.E.I. Balanced Dome Tweeter

Product Description

Kenwood Kfc-C1739Ie 7" 3-Way Custom Fit Speaker System

Kenwood Kfc-C1739Ie 7-Inch 3-Way Custom Fit Speaker System Review

I found that these speakers proved to be easy to install in my door pannels of my 94'Camry and sounded better than the factory speakers. I reccomend them for their quality, price, and ease of installation.

Most of the consumer Reviews tell that the "Kenwood Kfc-C1739Ie 7-Inch 3-Way Custom Fit Speaker System" are high quality item. You can read each testimony from consumers to find out cons and pros from Kenwood Kfc-C1739Ie 7-Inch 3-Way Custom Fit Speaker System ...

Saddlemen 6 1/2in..x 6 1/2in. Gravestone Studded Sissy Bar Pad with Chrome Studs 0408Y

You looking to find the "Saddlemen 6 1/2in..x 6 1/2in. Gravestone Studded Sissy Bar Pad with Chrome Studs 0408Y" Good news! You can purchase Saddlemen 6 1/2in..x 6 1/2in. Gravestone Studded Sissy Bar Pad with Chrome Studs 0408Y with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $58.59    

Product Feature

• Perfect match for all Saddlemen seats
• Mount to aftermarket sissy bars with 5 width
• Chromed mounting brackets included

Product Description

Perfect match for all Saddlemen seats
Mount to aftermarket sissy bars with 5 width
Chromed mounting brackets included

Saddlemen 6 1/2in..x 6 1/2in. Gravestone Studded Sissy Bar Pad with Chrome Studs 0408Y Review

Bought it. It arived early. loved it and it fit perfectly. I would reccommend this product. Bought the seat as well. My bike looks fantastic!

Most of the consumer Reviews tell that the "Saddlemen 6 1/2in..x 6 1/2in. Gravestone Studded Sissy Bar Pad with Chrome Studs 0408Y" are high quality item. You can read each testimony from consumers to find out cons and pros from Saddlemen 6 1/2in..x 6 1/2in. Gravestone Studded Sissy Bar Pad with Chrome Studs 0408Y ...

Yamaha DBY-ACC56-23-70 SHAD Top Case Mounting Kit for Yamaha FJR1300

You looking to find the "Yamaha DBY-ACC56-23-70 SHAD Top Case Mounting Kit for Yamaha FJR1300" Good news! You can purchase Yamaha DBY-ACC56-23-70 SHAD Top Case Mounting Kit for Yamaha FJR1300 with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $57.95    

Product Feature

• This Mounting Kit is required for installation of the SHAD Top Cases on both FZ1 and FZ6 models.

Product Description

This Mounting Kit is required for installation of the SHAD Top Cases on both FZ1 and FZ6 models.
Fits:
YAMAHA
FJR1300A 06-13

Yamaha DBY-ACC56-23-70 SHAD Top Case Mounting Kit for Yamaha FJR1300 Review

Owning a 2013 FJR1300 , this piece of equipment is a must have.
Well made and fits perfectly onto the rear rack of my bike .
I would highly recommend the top case mounting kit for all Yamaha FJR1300 riders.
Ordering , delivery and install were a breeze.
Recommend to all.

Most of the consumer Reviews tell that the "Yamaha DBY-ACC56-23-70 SHAD Top Case Mounting Kit for Yamaha FJR1300" are high quality item. You can read each testimony from consumers to find out cons and pros from Yamaha DBY-ACC56-23-70 SHAD Top Case Mounting Kit for Yamaha FJR1300 ...

Jeep Wrangler 90-06 DRIVER Inside Door Handle,OEM Mopar

You looking to find the "Jeep Wrangler 90-06 DRIVER Inside Door Handle,OEM Mopar" Good news! You can purchase Jeep Wrangler 90-06 DRIVER Inside Door Handle,OEM Mopar with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $59.00   

Product Feature

• This is a new OEM replacement part not aftermarket
• NEW! Jeep Wrangler 90-06 DRIVER Inside Door Handle,OEM Mopar

Product Description

JEEP WRANGLER DRIVER SIDE INSIDE DOOR HANDLE Is your DRIVER, or LEFT SIDE inside door handle broken on your 1990-2006 Jeep Wrangler? Well then, this is the cure for you. This is a genuine Mopar replacement specifically designed for your Jeep to last for many more years to come. MOPAR # 55176477AB

Jeep Wrangler 90-06 DRIVER Inside Door Handle,OEM Mopar Review

This is one of those items that is better to stick with OEM than go aftermarket. The few dollars saved by buying a cheaper one just isn't worth it.

I recently had to replace the driver's side door handle on my 97 TJ and bought a cheaper one for a little more than 1/2 the price of this one on Amazon shipped. When I got it, the quality difference wasn't immediately apparent as I was replacing a broken, worn, 15 year old part. The clips on the aftermarket were a little smaller and installation took me a bit and I struggled to get the clips on. I finally got it all installed and 3 days later on my 6th time opening the door, the handle snapped in half. My previous breakage to the original part had been around the screw that holds the entire assembly in place but the handle itself was still intact. I figured I might be able to combine the two and make a good one. While it was possible, it was during the assembling of the new hybrid piece that I found another issue with the aftermarket that was going to cause problems had the handle not snapped in half so soon. The handle and lock button are held in place by 2 plastic arms on either side. The arms push down on the round plastic piece that pivots when you open the door. On the aftermarket one, these arms were just a tad bit shorter so instead of holding it firmly in place, there is slop and the pivot point moves back and forth putting more stress on the 2 plastic legs and allowing the pivot point move out of place. If the handle hadn't snapped, it would have failed there next. Probably sooner than later too.

Once I received the factory part, it was really easy to see the differences. The handle on the OEM has a thicker spring than the aftermarket one and gave more resistance when opening the door. Comparing the two springs, the aftermarket one is made from a smaller gauge wire. While it is easier to operate with a smaller spring, it also lended to a cheap feeling. The plastic used in the OEM replacement is thicker, the texturing is more pronounced and the color is darker and shiny. It felt more substantial in the hand than the aftermarket too. The aftermarket one was more of a hazy matte black with a texture that you could barely feel. It was a closer match to the worn 15 year old part than the new one. Like they had used an old part as a guide for their new one. The lettering for lock on the aftermarket one wasn't white but it was at least molded onto the lock button.

Installation of the OEM part was much easier taking me less than 5 minutes to install. The hole in the clips that the metal rods slide into is slightly larger and the rod went right in. The clips were also much easier to engage and they snapped right on. I didn't have to struggle with them at all and when they clipped into place, they locked. Comparing the two clips, you can see the OEM clips are open just slightly more and that the aftermarket is a little on the small side for the size if the rods. Just enough to make it more difficult to install. The OEM clip is just better matched to the size of the metal rod it goes on.

Seems like a lot of writing for a cheap part but I wasted a week or so of time and even though I got a refund on the broken part, I still ended up paying shipping twice. Save yourself the time and hassle and stick to the OEM part until they're not available anymore. I got 15 years of service out of the first one and I expect to get that out of the replacement. Another plus is that the OEM part looks a lot nicer too. Chances are you're replacing an old, worn out part and wouldn't really see the differences in appearance unless you saw two new parts side by side. The pictures all look too similar and don't really tell the story.

I purchased mine from the seller Avondale Auto Group on Sunday and had the part in hand on Wednesday. The part was sealed in the OEM bag and well packaged. They even used recycled, shredded paper to protect the part in the shipping box. All around a great transaction as well as a great deal on a factory part that was more than 2X as much locally. I'll certainly be getting another OEM one to replace the passenger side soon. The new one on the driver's side makes the old one look out of place now and with the money I saved over buying it from a local dealership parts dept, it'll be like getting it for free. ;)

Most of the consumer Reviews tell that the "Jeep Wrangler 90-06 DRIVER Inside Door Handle,OEM Mopar" are high quality item. You can read each testimony from consumers to find out cons and pros from Jeep Wrangler 90-06 DRIVER Inside Door Handle,OEM Mopar ...